Fix Troubleshooting Startup Problems with Microsoft Expression Design Using CMD code

Summary: This article describes in detail troubleshooting steps to resolve problems one may encounter when attempting to launch Microsoft Expression Design.

Problem: Expression Design locks up, hangs or crashes while in the process of starting up. During this time, the user may see the Expression Design splash screen remain on the screen, the splash screen may disappear and Expression Design never launches or the user may see an exception error the application will shut down or fail to launch.

Steps to Troubleshoot

Start the machine in Safe Mode:

Click the START button, and in the run line (or command line) type MSCONFIG and hit ENTER.

The System Configuration utility should launch. Click the Boot tab. Under 'Boot Options' click to check the box for 'Safe boot', then click Apply. The OK button will read "Close". Click close and click 'Yes' to restart the machine when prompted.

After the machine has booted into safe mode, try launching Expression Design again.

Note If Expression Design launches successfully in Safe Mode, then the problem most likely is related to video drivers. If Expression Design still locks up in safe mode, this may be indicative of a bad install of the .NET Framework 3.0 (for Expression Design version 1) or .NET Framework 3.5 (for Expression Design version 2). See the section on "Reinstalling the Microsoft .NET Framework 3.0 and 3.5" in this article. Failure to launch in safe mode could also be indicative of a hardware problem on the machine or a bad install of Expression Design - see the section on "Reinstalling Expression Design". If all of those steps to resolve do not fix the problem, contact Microsoft Technical Support (http://support.microsoft.com/).

Then Click START and in the run (command) line type MSCONFIG and click on the Boot tab again. Under 'Boot options', uncheck the box for 'Safe Boot' and click Apply, Close and click 'Yes' to restart the machine when prompted.

If Expression Design launches successfully in Safe Mode

This may indicate a problem with the video driver on the machine. To check, try reducing or disabling hardware acceleration on the video card by doing the following:

Right click on the Desktop > Properties > Settings tab > Advanced button > Troubleshooting tab.

Click and drag the Hardware Acceleration slider from its original maximum postition to the lowest possible. Then try launching Expression Design again.

Note If Expression Design launches with the Hardware Acceleration settings turned off or reduced, you will want to check the website for your video card manufacturer for the latest driver update. You can also check the Microsoft Windows Update site and do a Custom search instead of the Express search, as the Custom search lists available hardware updates.

Reinstalling the Microsoft .NET Framework 3.0 or 3.5

A Corrupt or missing install of the Microsoft .NET Framework 3.0 or 3.5 can cause Expression Design to crash or hang when launched. To reinstall the .NET Framework 3.0 (For Expression Design version 1) or 3.5 (for Expression Design version 2), follow these steps:

Click START and launch the Control Panel.

Open Add or Remove Programs (in Vista openPrograms and Features).

Look for Microsoft .NET Framework 3.0 or 3.5 in the list of currently installed programs. If you do not see Microsoft .NET Framework 3.0 or 3.5 listed, this may be the cause of your startup issue with Expression Design as the .NET Framework 3.0 is required to run Expression Design 1 (Framework 3.5 for Expression Design 2).

If the .NET Framework 3.0 or 3.5 is listed, click it and then click Add or Remove. If you encounter an error while uninstalling the .NET Framework, please refer to the following Microsoft Knowledge Base article for in-depth troubleshooting help specific to the .NET Framework install and uninstall: http://support.microsoft.com/kb/908077.

Reinstall the .NET Framework 3.0 or 3.5. The .NET Framework is included on the Expression Studio disc and is also available for download from the Microsoft website:

Microsoft .NET Framework 3.0 Redistributable Package
http://www.microsoft.com/downloads/details.aspx?FamilyID=10CC340B-F857-4A14-83F5-25634C3BF043

Microsoft .NET Framework 3.5 Redistributable Package
http://www.microsoft.com/downloads/details.aspx?FamilyID=333325fd-ae52-4e35-b531-508d977d32a6

Launch Expression Design 1 or 2 again. If Expression Design still fails to launch, contact Microsoft Technical Support (http://support.microsoft.com/).

Solution: Fixing Troubleshooting Startup Problems with Microsoft Expression Design errors is a really difficult task for most computer users. In order to fix your errors and speed up PC, it is recommended that your download the 'Troubleshooting Startup Problems with Microsoft Expression Design Repair Tool'. It's an amazing software which is designed for users to troubleshoot Troubleshooting Startup Problems with Microsoft Expression Design errors efficiently..

Download Troubleshooting Startup Problems with Microsoft Expression Design Problems Fixer Now

In order to repair Troubleshooting Startup Problems with Microsoft Expression Design error, install SmartPCFixer immediately. This system optimizer software is already proven to locate, identify, and repair Troubleshooting Startup Problems with Microsoft Expression Design errors. Speed up your PC with SmartPCFixer at once

Manual Solutions

What Else Does SmartPCFixer Offer You?

SmartPCFixer™ is not only able to troubleshoot Troubleshooting Startup Problems with Microsoft Expression Design error, but also help identify and fix Windows' invalid registry entries. By running Scan & Cleaner as part of scheduled maintenance, it will keep your PC from freezing or frequent crashes . Using it will reduce the probability of you getting a "blue screen", program not responding or lock up.

SmartPCFixer is designed to scan, diagnose and repair your operating system. Using it results in better optimization, manages startup and desktop, assists you with maintaining browser objects, internet options, system service, and repairs file extensions. With this arsenal of powerful, sophisticated utilities your system is tuned to run at its optimal state. Included are Easy Repair Wizard, Error Utilities, File Association fixer, Register ActiveX, Shortcuts Fixer, Winsock2 Repair toolkit, Dll Fixer and more.

Related: Can't Stop,Running Error,Renew Exe,Stop Running Script,Speed Computer Up
Read More: ,0xc000005 error,server error 554,internet explorer has stopped working,offline installer smartpcfixer,component transfer error smart pcfixer

Read More

How to Solve:

Summary: When you run the Windows Management Instrumentation (WMI) core component installation program (Wbemsdk.exe), you may receive the following error message: Installation Aborted! Internal Error.

Solution: If you fix SMS: WMI Installation Error Message: Installation Aborted! Internal Error error in time, your PC will run like brand new. To solve SMS: WMI Installation Error Message: Installation Aborted! Internal Error problems effectively and efficiently, install a good SMS: WMI Installation Error Message: Installation Aborted! Internal Error Error Removal Tool is a smart solution. This is definitely your ideal tool to solve SMS: WMI Installation Error Message: Installation Aborted! Internal Error problem in the shortest time.

Try SMS: WMI Installation Error Message: Installation Aborted! Internal Error Removal Program Now

In order to repair SMS: WMI Installation Error Message: Installation Aborted! Internal Error issue, use the SmartPCFixer software program. This optimization tool is already proven to locate, identify, and fix SMS: WMI Installation Error Message: Installation Aborted! Internal Error errors. Your computer should run faster and smoother after using this software.

Manual Solutions

What Else Does SmartPCFixer Offer You?

Apart from fixing SMS: WMI Installation Error Message: Installation Aborted! Internal Error problems, SmartPCFixer is designed to provide the user's computer system with better optimization, which helps you manage startup items, desktop, browser objects, Internet, system service, Windows optimization, file extensions and so on. With these sophisticated utilities your system is tuned up to run at the optimal state.

SmartPCFixer provides you with Registry Backup, System Backup, Favorites Backup and Folder Backup. In addition, the new built-in function of Restore Point enables you to create a system store point so you can recover your system to a previous state if you do not like the changes you have made. This ensures the safety of your system when you run the registry repair process.

Related: Mass Storage Device May Not Be Started During Unattended Setup,Logitech PageScan Does Not Work After Upgrade,Msg 'Unable To Locate The Pathname File' When Launching Dynamics,Overview Of The SPVerify Tool,Microsoft Dynamics AX 4.0 Creates Unnecessary Records In The CustInvoiceJour Table After You Post A Sales Order Invoice For A Customer Prepayment
Read More: ,FIX: The OLE DB Provider for DB2 may not correctly execute a SELECT statement that contains a TOP clause after you apply a Host Integration Server 2004 update for the OLE DB Provider for DB2,How to Do an Unattended Update of SNA Server/Client to the Latest Service Pack,FIX: Unexpected problems may occur when multiple instances of Internet Explorer are opened in Windows CE .NET 4.2,FIX: Error message when you try to load an ActiveX control in an application that you built by using Visual Basic 6.0: "Failed to load control",FIX: You may experience a decrease in performance if you repeatedly call the setQueryTimeout method on a connection object by using the SQL Server 2000 Driver for JDBC

Read More

How to Solve:

Summary: When you try to compress old files on a Windows XP-based computer, the Disk Cleanup tool

may stop responding, and you may receive the following message:Disk Cleanup is calculating how much space you will be able to

free on (C:).
This may take a few minutes to complete.
Scanning:

Compress old files

To have us fix this problem for you, go to the “Fix it for me” section. If you would rather fix this problem yourself, go to the “Let me fix it myself” section.

Resolution: Repairing The Disk Cleanup tool stops responding while it is compressing old files on a Windows XP-based computer problem can not be that easy. To solve The Disk Cleanup tool stops responding while it is compressing old files on a Windows XP-based computer problems effectively and efficiently, install a good The Disk Cleanup tool stops responding while it is compressing old files on a Windows XP-based computer Error Removal Tool is a smart solution. This is an advanced optimizing tool the can repair all those problems that are slowing your computer down.

Download The Disk Cleanup tool stops responding while it is compressing old files on a Windows XP-based computer Problems Fixer Now

In order to repair The Disk Cleanup tool stops responding while it is compressing old files on a Windows XP-based computer error, use the SmartPCFixer software program. This system optimizer software is already proven to locate, identify, and troubleshoot The Disk Cleanup tool stops responding while it is compressing old files on a Windows XP-based computer errors. Speed up your PC with SmartPCFixer at once

Manual Solutions

What Else Does SmartPCFixer Offer You?

Apart from fixing The Disk Cleanup tool stops responding while it is compressing old files on a Windows XP-based computer problems, SmartPCFixer is designed to provide the user's computer system with better optimization, which helps you manage startup items, desktop, browser objects, Internet, system service, Windows optimization, file extensions and so on. With these sophisticated utilities your system is tuned up to run at the optimal state.

SmartPCFixer provides you with Registry Backup, System Backup, Favorites Backup and Folder Backup. In addition, the new built-in function of Restore Point enables you to create a system store point so you can recover your system to a previous state if you do not like the changes you have made. This ensures the safety of your system when you run the registry repair process.

Related: I_DOTLESS_SMALL In PDF Always Maps To Space,Packard Bell 4500 Computer Hangs In Standby Or Suspend Mode,Msg 'Unable To Locate The Pathname File' When Launching Dynamics,PC DB: Which Programs Access The GROUP.GLB File,Is It Possible To Recover A Check That Was Voided In AP?
Read More: ,FIX: Network File System (NFS) client users that do not have the "List Folder / Read Data" permission can still see the file list from an NFS share,How to change from one edition of Microsoft Great Plains to another edition of Microsoft Great Plains,FIX: GPF/UAE When Assign NULL to VBM_GETPROPERTY of type HLSTD,FIX: Pop-Up Menu Items Disabled for an OLE Control,FRx Balance Sheet is incorrect and does not match GL Trial Balance.

Read More

How to Troubleshoot: PC DirSync: Err Msg: Fatal [ 7] Error Renaming File

Summary: During a postoffice Directory Synchronization (Dir-Sync), the DIRSYNC.LOG may indicate one of the following errors: 06/12/95 16:52:14 | Status Microsoft (R) Mail Import V3.2a
06/12/95 16:52:23 | Fatal [ 7] Error renaming file: M:INF\IMPORT.INF or 06/08/94 02:47:52 | Status Microsoft (R) Mail Import V3.2.6
06/08/94 03:13:25 | Fatal [ 7] Error renaming file: M:USR\IMPORT.USR

Resolution: Fixing PC DirSync: Err Msg: Fatal [ 7] Error Renaming File errors is a really difficult task for most computer users. In order to fix your errors and speed up PC, it is recommended that your download the 'PC DirSync: Err Msg: Fatal [ 7] Error Renaming File Repair Tool'. It's an amazing software which is designed for users to troubleshoot PC DirSync: Err Msg: Fatal [ 7] Error Renaming File errors efficiently..

Install PC DirSync: Err Msg: Fatal [ 7] Error Renaming File Error Fixer Now

In order to repair PC DirSync: Err Msg: Fatal [ 7] Error Renaming File issue, install SmartPCFixer immediately. This system optimizer software is already proven to locate, identify, and troubleshoot PC DirSync: Err Msg: Fatal [ 7] Error Renaming File errors. Your computer should run faster and smoother after using this software.

Manual Resolutions

Generally, this inability to properly rename the files is caused by that particular file (INF or USR) being inaccessible for some reason. These reasons may include any of the following:

The INF is locked open.

The user account logged into the network and running the Dir-Sync processes (DISPATCH.EXE) does not have sufficient rights to the postoffice or its subdirectories.

Insufficient file handles in the CONFIG.SYS of the MS-DOS machine running the DISPATCH.EXE process.

One or more INF (or USR) file in the INF subdirectory is marked as read-only.

Anti virus software operating in "real time" on the server.

Because of oplocks on the Windows NT server, the reads and writes are cached. Removing Opportunistic Locking on the Windows NT server experiencing the fatal 7 has been known to resolve this issue. To remove Oplocks from the server use REGEDT32.EXE, and change the following key; WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer \Parameters

What Else Does SmartPCFixer Offer You?

Apart from fixing PC DirSync: Err Msg: Fatal [ 7] Error Renaming File problems, SmartPCFixer is designed to provide the user's computer system with better optimization, which helps you manage startup items, desktop, browser objects, Internet, system service, Windows optimization, file extensions and so on. With these sophisticated utilities your system is tuned up to run at the optimal state.

SmartPCFixer provides you with Registry Backup, System Backup, Favorites Backup and Folder Backup. In addition, the new built-in function of Restore Point enables you to create a system store point so you can recover your system to a previous state if you do not like the changes you have made. This ensures the safety of your system when you run the registry repair process.

Related: DriverTuner,Driver Tuner,Driver Tuner,Driver Tuner
Read More: ,chrome plug,windows audio driver,0x800706d9,How To Add the Purchase Order Number to the Check with Stub on Top and Bottom,FIX: SP1 Regression: Running FREETEXT Queries May Cause a MS Search Resource Leak

Read More

How to Fix Office 97 Starts Here: Box Lists Wrong Disk Space Requirements Error

Summary:

Resolution: Repairing Office 97 Starts Here: Box Lists Wrong Disk Space Requirements problem can not be that easy. In order to fix your errors and speed up PC, it is recommended that your download the 'Office 97 Starts Here: Box Lists Wrong Disk Space Requirements Repair Tool'. This is definitely your ideal tool to solve Office 97 Starts Here: Box Lists Wrong Disk Space Requirements problem in the shortest time.

Download the Office 97 Starts Here: Box Lists Wrong Disk Space Requirements repair tool

In order to repair Office 97 Starts Here: Box Lists Wrong Disk Space Requirements issue, install SmartPCFixer immediately. This optimization tool is already proven to locate, identify, and fix Office 97 Starts Here: Box Lists Wrong Disk Space Requirements errors. Your computer should run faster and smoother after using this software.

Manual Solutions

What Else Does SmartPCFixer Offer You?

Apart from fixing Office 97 Starts Here: Box Lists Wrong Disk Space Requirements problems, SmartPCFixer is designed to provide the user's computer system with better optimization, which helps you manage startup items, desktop, browser objects, Internet, system service, Windows optimization, file extensions and so on. With these sophisticated utilities your system is tuned up to run at the optimal state.

SmartPCFixer is designed to scan, diagnose and repair your operating system. Using it results in better optimization, manages startup and desktop, assists you with maintaining browser objects, internet options, system service, and repairs file extensions. With this arsenal of powerful, sophisticated utilities your system is tuned to run at its optimal state. Included are Easy Repair Wizard, Error Utilities, File Association fixer, Register ActiveX, Shortcuts Fixer, Winsock2 Repair toolkit, Dll Fixer and more.

Related: DriverTuner,DriverTuner,DriverTuner,DriverTuner
Read More: ,free blank page,where find internet options,How to increase the number of databases that are supported by the MTA service when Exchange Server 5.5 coexists with a server cluster that is running Exchange Server 2003,FIX: The layout of a control on an inherited Windows Form may change when you use the .NET Framework 1.1,How to configure Sybari Enterprise Manager to send a Signature Update notification when an engine update fails in Antigen

Read More

How to Solve:

Summary: When you run a Web test by using Visual Studio 2005 Team Suite Test Edition, the QueryString parameters are not encoded correctly. Additionally, the Web page does not execute correctly. This problem occurs when one of the following conditions is true:

One Web page has a redirection request to another Web page. The redirected page requires the QueryString parameters to be encoded.

One Web page has a dependent request. This request contains QueryString parameters that require encoding.

Solution: If you fix FIX: The QueryString parameters are not encoded correctly when you run a Web test by using Visual Studio 2005 Team Suite Test Edition error in time, your PC will run like brand new. To solve FIX: The QueryString parameters are not encoded correctly when you run a Web test by using Visual Studio 2005 Team Suite Test Edition problems effectively and efficiently, install a good FIX: The QueryString parameters are not encoded correctly when you run a Web test by using Visual Studio 2005 Team Suite Test Edition Error Removal Tool is a smart solution. It's an amazing software which is designed for users to troubleshoot FIX: The QueryString parameters are not encoded correctly when you run a Web test by using Visual Studio 2005 Team Suite Test Edition errors efficiently..

Install FIX: The QueryString parameters are not encoded correctly when you run a Web test by using Visual Studio 2005 Team Suite Test Edition Error Fixer Now

In order to repair FIX: The QueryString parameters are not encoded correctly when you run a Web test by using Visual Studio 2005 Team Suite Test Edition error, use the SmartPCFixer software program. This optimization tool is already proven to locate, identify, and fix FIX: The QueryString parameters are not encoded correctly when you run a Web test by using Visual Studio 2005 Team Suite Test Edition errors. Speed up your PC with SmartPCFixer at once

Method for Advanced Users

Hotfix information

A supported hotfix is now available from Microsoft. However, it is intended to correct only the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Visual Studio 2005 Team Suite service pack that contains this hotfix.

To resolve this problem immediately, contact Microsoft Customer Support Services to obtain the hotfix. For a complete list of Microsoft Customer Support Services telephone numbers and information about support costs, visit the following Microsoft Web site:http://support.microsoft.com/contactus/?ws=supportNote In special cases, charges that are ordinarily incurred for support calls may be canceled if a Microsoft Support Professional determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

Prerequisites

You must have Visual Studio 2005 Team Suite Service Pack 1 installed to apply this hotfix.

Restart requirement

You do not have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace any other hotfixes.

File information

The English version of this hotfix has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.File nameFile versionFile sizeDateTimeMicrosoft.VisualStudio.QualityTools.LoadTest.dll8.0.50727.804528,38413-Feb-200702:52Microsoft.VisualStudio.QualityTools.WebTestFramework.dll8.0.50727.804139,26413-Feb-200702:52

What Else Does SmartPCFixer Offer You?

Apart from fixing FIX: The QueryString parameters are not encoded correctly when you run a Web test by using Visual Studio 2005 Team Suite Test Edition problems, SmartPCFixer is designed to provide the user's computer system with better optimization, which helps you manage startup items, desktop, browser objects, Internet, system service, Windows optimization, file extensions and so on. With these sophisticated utilities your system is tuned up to run at the optimal state.

SmartPCFixer provides you with Registry Backup, System Backup, Favorites Backup and Folder Backup. In addition, the new built-in function of Restore Point enables you to create a system store point so you can recover your system to a previous state if you do not like the changes you have made. This ensures the safety of your system when you run the registry repair process.

Related: Error Message When You Run The "Import Rabobank Mut.asc" Dataport In The Netherlands Version Of Microsoft Dynamics NAV: "Could Not Find A Bank Account With Bank Account No",Error Message When You Run A Long Process That Repeatedly Logs Messages In The Infolog Dialog Box In Microsoft Dynamics AX 4.0: "Internal Error Number 25 In Script",Error Message When You Use Windows Media Center To Burn A CD Or A DVD From A Folder That Represents The Root Of A Drive In Windows Vista: "An Error Has Occurred In Burning The CD/DVD",Err Msg: RPC Initialization Failure,DOC: ADSI Mailbox Sample Does Not Associate Windows NT Accounts Properly
Read More: ,error 400,it tool,corrupted files,enable cookies facebook,error code 0xc004f074

Read More

Is There a way to repair How To Create a System-Modal Program/Window in Visual Basic

Summary:

Resolution: If you fix How To Create a System-Modal Program/Window in Visual Basic error in time, your PC will run like brand new. To solve How To Create a System-Modal Program/Window in Visual Basic problems effectively and efficiently, install a good How To Create a System-Modal Program/Window in Visual Basic Error Removal Tool is a smart solution. It's an amazing software which is designed for users to troubleshoot How To Create a System-Modal Program/Window in Visual Basic errors efficiently..

Try How To Create a System-Modal Program/Window in Visual Basic Removal Program Now

In order to repair How To Create a System-Modal Program/Window in Visual Basic problem, use the SmartPCFixer software program. This system optimizer software is already proven to locate, identify, and troubleshoot How To Create a System-Modal Program/Window in Visual Basic errors. Speed up your PC with SmartPCFixer at once

Manual Resolutions

What Else Does SmartPCFixer Offer You?

SmartPCFixer™ is not only able to troubleshoot How To Create a System-Modal Program/Window in Visual Basic error, but also help identify and fix Windows' invalid registry entries. By running Scan & Cleaner as part of scheduled maintenance, it will keep your PC from freezing or frequent crashes . Using it will reduce the probability of you getting a "blue screen", program not responding or lock up.

SmartPCFixer provides you with Registry Backup, System Backup, Favorites Backup and Folder Backup. In addition, the new built-in function of Restore Point enables you to create a system store point so you can recover your system to a previous state if you do not like the changes you have made. This ensures the safety of your system when you run the registry repair process.

Related: Description Of The Import/Export Wizard That Is Included With Internet Explorer 5.0 Or Later,Error Message: This Action Cannot Be Completed Because The '' Program Is Not Responding",Error Message Installing Microtek Scan Wizard,Entity Mappings Between The Custom Entity And The Contract Entity Do Not Work As Expected In Microsoft Dynamics CRM 3.0,Domain User Cannot Add A Local Printer
Read More: ,best computer,error 0x80240017,computer sound system,delete pop up,cd rom drive not detected

Read More